-
The Swimming Pool Installation Process
Installing a swimming pool in your backyard is an excellent way to add some fun to your property, but you shouldn’t trust your pool installation to just anyone. Deep Blue Pool and Spas is an experienced pool contractor in Salt Lake City that knows how to get a pool built properly.
In order to put in a pool, a contractor will begin by digging a hole for it in your backyard. Wall panels, supports, and plumbing and electrical work will then need to be done before the pool itself is added. After that, dirt will be poured around the pool and a pool deck will be built around it. At that point, a liner or pool tile can be installed to complete the process. When you work with Deep Blue Pool and Spas, your pool installation will get done correctly so that you can begin enjoying your pool right away.
-
Make the Most of Your Backyard Living Space
The backyard of your home should be your sanctuary. When you go there, you should feel relaxed, and you should be able to kick back and truly enjoy it. The best way to do this is to have a swimming pool installation done so that you can feel like you’re on vacation while you’re in your backyard. A pool contractor in Salt Lake City can make this possible. Here are some other ways that you can make the most of your space.
Outdoor Kitchen
Eating in your backyard is great, but it can be annoying to have to run in and out of your house every time you need something from the kitchen. To solve this problem, why not dedicate some space to putting in a small outdoor kitchen area? You can prepare food in it, store kitchen items, and clean up once you’re done eating.Landscaping
There’s no reason to have just grass surrounding your pool area. Instead, find the right mix of bushes, plants, and flowers to turn your backyard into paradise. You can also add hardscaping to your backyard and surround your plant life with stones. You shouldn’t put in anything that’s too difficult to maintain, but with the right additions, your backyard will look totally transformed.Fire Pit
Unless you live somewhere where it stays very warm well into the night, an outdoor fire pit can be a great way to keep the party going in your backyard once the sun goes down. Before you settle on the location of your swimming pool installation, figure out the best place to put a fire pit so that it’s centrally located but not too close to the pool.Seating
Once you have everything else installed, figure out places to put seating for people. The last thing you want to do is run out of it, so use a variety of different seating options. From lawn chairs to stone walls that double as seats, there should be plenty of places for people to sit by your pool. -
What You Should Know About Pool Ownership
Owning your own swimming pool is a great investment, because it not only provides you and your family with a safe and fun way to get exercise over the summer, but it also increases your home’s value. While startup costs for pool installation may seem high, swimming pool maintenance costs are often cheaper per summer than the average family vacation. Here are a few more things you should know if you’re considering a swimming pool installation in Salt Lake City .
Average Monthly Pool Maintenance Costs
Your swimming pool maintenance costs will vary by region, but on average, the cost is only around $200 per month. This cost includes the electrical costs to run your pool equipment, which are around $80 per month. You’ll also spendaround $80 per month on electrical or gas costs for a pool heater for your pool, hot tub, or spa. The cost of the chemicals necessary to maintain the sanitation levels of the pool will be around $20 per month. If your pool or pool equipment requires maintenance or repairs, the cost averages to about $20 per month. Hiring a professional swimming pool services company for your pool maintenance, such as cleaning, and testing and adjusting your pool’s chemical levels, can be around $100-$300 per month depending upon your region.
Average Swimming Pool Installation Costs
Again, this cost varies from region to region. On average, swimming pool builders and installers charge around $40,000. This cost can increase or decrease depending upon certain pool features, such as the type of pool deck and pool tile, and weather the pool is a small pool, lap pool, indoor swimming pool, or an in ground pool.Average Increase to Your Home’s Value With a Swimming Pool
A swimming pool will always increase the resale value of your home. How much it increases depends upon your neighborhood and your region. An in ground swimming pool installation can increase the value of your home between 8% and 15%. In the Southeast, the value will increase between 5% and 10%. In the Southwest, between 8-13%. -
Choosing a Swimming Pool Contractor
If you are considering a swimming pool installation for your yard, you should be sure to hire a quality swimming pool contractor to perform the job. By doing your research and hiring a highly rated swimming pool contractor near Salt Lake City , you can rest assured that your swimming pool or hot tub installation will be performed to perfection. As you are selecting a swimming pool contractor, you should look at the contractor’s reputation in the local community. Additionally, you should also make sure that the swimming pool company that you are considering working with is fully licensed and insured. To learn more about some handy tips for choosing a swimming pool contractor, watch this video from Swimmingpool.com.
-
The Benefits of Having a Swimming Pool
As the outdoor temperatures heat up, chances are that you may be dreaming of a swimming pool installation in your backyard. With help from a highly rated pool contractor in Salt Lake City, you can transform your dreams into a reality. When you install a new pool and water feature in your yard, you will create an inviting oasis for your family and friends to enjoy. Whether you are seeking a spot to hang out with friends or a lap pool for exercise, a company offering swimming pool maintenance and installation can help you create the perfect pool for you. Read on for a closer look at some of the great benefits of having a swimming pool.
Create a Gathering Space
When you install a swimming pool in your backyard, you will create a central gathering space for your family and friends. Over the summer months, your swimming pool will be an area where your loved ones will enjoy having parties, relaxing, and taking a dip in the cool water.Increase Convenience
If you love spending time at the pool, you will add convenience to your summer recreation by installing an inground pool in your backyard. When you have a pool installed on your property, a day of fun at the pool will be mere steps away from your home. Whether you love to host backyard cookouts or simply spend time in the sun, a pool is sure to be a convenient and enjoyable addition to your home.Encourage Exercise
A swimming pool installation in your home will also encourage your family and friends to get outdoors and become active. When you swim or play in a swimming pool, you will enjoy the low-impact benefits of exercising in water. If you are planning on kicking your fitness routine into the next gear, you may also want to consider swimming laps in your pool. Lap swimming is a terrific way to get in shape for the summer months. -
Testing Your Pool’s Water
With the summer season nearly here, now is a great time to plan a new swimming pool installation serving Salt Lake City . With help from a reputable pool contractor, you will be able to create the quality swimming pool of your dreams. After you install your new pool and water feature, you will need to care for your pool with routine
swimming pool maintenance. By keeping the water chemistry balanced in your pool, you will be able to ensure that your pool is clean and inviting for your family and guests. Read on for a closer look at how to test your pool’s water.
Langelier Saturation Index Calculator
The Langelier Saturation Index Calculator, or LSI, is a method for determining whether your pool may be prone to developing chemical scaling. The term chemical scaling is used to describe any sediment or buildup that is created by too many chemicals in your pool. To calculate the LSI of your pool water, you will need to measure the pH, conductivity, dissolved solids, and alkalinity of your pool. If your results suggest that your pool is at risk of scaling, you will need to balance your chemicals.pH Testing
If you are seeking the most crucial test for your swimming pool water , you may want to perform a pH test. The pH of your pool is a measurement of the total acidity of your water. Since a pool with a high or low pH will not be inviting for swimmers, this is among the most important measurements that you can perform as a pool owner.Calcium Hardness
To prevent corrosion and other issues in your pool, you may also want to perform a test for calcium hardness. With a calcium hardness test, you will measure for the amount of dissolved solids in your pool water. Your swimming pool contractor can perform this test on your behalf. All you will need to do is supply a pool water sample to your pool technician. -
Tips for Designing Your New Swimming Pool
One of the best ways to beat the heat in Utah during the summer is with your very own in-ground swimming pool. A new pool can also increase the value of your home, which means you can recoup most (if not all) of the cost a building a swimming pool when the time comes to sell. To make sure you end up with the best final product, here are some tips for designing a new swimming pool with your Salt Lake City pool builder .
Set a Budget For starters, sit down with your pool company and set a realistic yet flexible budget for your new swimming pool. We say flexible because the project may include additional features and elements later on that you didn’t anticipate or expect at the onset. While you’re crunching numbers, take a few minutes to set a monthly pool maintenance budget. How much you can afford to spend on maintenance and upkeep will help you select the most appropriately sized pool, since larger pools tend to require more maintenance and have higher operating costs.
Measure Your Space
Before you decide on the size and dimensions of your new swimming pool, you must first determine the size and dimensions of your backyard. It’s important that you design a pool that is appropriately sized for the space you have available. You also need to factor in space for a deck, patio, fencing, outdoor fireplace, and other desired features.Consider the Entire Living Area
Speaking of additional features, take the opportunity to remodel your entire outdoor living space while designing your new swimming pool. Some pool companies in Salt Lake City provide additional landscape and hardscape design and installation services. Whether you want a simple outdoor fireplace or an entire outdoor kitchen, there’s no better time to design the backyard of your dreams while designing the swimming pool of your dreams. -
Features to Include with Your Pool
Many homes feature in ground pools near Salt Lake City , and many homeowners decide to install them because summers in Utah offer perfect weather to enjoy a pool. When you meet with your pool contractor, you should be aware of the special design features you can incorporate to make your pool much more attractive than a simple rectangle in the ground.
A simple, elegant water feature such as a tiny waterfall at one edge will add visual interest to your pool and won’t require any extra swimming pool maintenance. Other features such as laminar jets are flashier and more eye-catching, and they add a lot of excitement to the design. Make sure you talk to your contractor about adding these before swimming pool installation begins. Many homeowners install colored lights in the pools, which turn them into sources of soft illumination at night and also increase safety. If you have kids, active features such as pool slides can add a lot of fun to your summer afternoons.
-
How to Choose Your Pool’s Design
Before you schedule your first meeting with your pool contractor in Salt Lake City to discuss your hot tub or pool installation, you should have a design idea in mind. Then, when you actually sit down to discuss it, the contractor will have an idea of what you want and can give you a more accurate time and cost estimate. There are three basic elements to keep in mind when designing a pool:
Shape and Size
Do you want your pool to be a perfect rectangle, or some other shape? Large enough for laps or small enough to fit on a tiny patio? Many rectangular pools are in fact L-shaped, with a set of steps and a handrail at one end that makes it easier for older and younger swimmers alike to get in and out. For a more organic look, you can choose a kidney shape or even a custom shape designed to mimic a natural lagoon or pond. The shape is the most permanent element of the design, especially when you install a fiberglass pool.
Pump and Filter
To keep the water in your pool from becoming a stagnant breeding ground for mosquitos and algae, you need some type of water treatment system. All pools feature a pump to keep water circulating and fresh. Some use salt treatments to prevent algae and fungus growth, while other use more traditional pool chemicals. You will need to schedule regular swimming pool maintenance to balance the chemicals in your pool unless you pay extra for a fully automated treatment system that continuously monitors the water chemistry.
Deck and Features
What material do you want surrounding the pool? Will you opt for classic pool tile, or do you want something more modern like poured concrete or stone? This is both a safety issue and an aesthetic issue—the surface needs to have enough traction to prevent you and your guests from slipping when it’s wet. Also, you should decide whether you to install colored pool lights, a mini-waterfall, laminar jets, an attached hot tub, or any other decorative features.
-
Modern Ideas for Your Swimming Pool
If you take a look at homes in the area, you will see that many of the modern fiberglass swimming pools in Salt Lake City are actually quite small. Older homes may still have traditional rectangular lap pools, but modern swimming pool installations are often designed to mimic the shape of natural ponds or lagoons.
Whether you are having a salt water pool or a hot tub installed, consider the size of your lot and the space around the pool. You will need to leave enough room around the edge for lounge chairs, barbecues, fire pits, and any other features you want in your outdoor space. Watch this video for swimming pool design tips that you can discuss with your pool builders.
RECENT POSTS
categories
- Uncategorized
- Hot Tub Installation
- Swimming Pool Installations
- Swimming Pool Design
- In Ground Pools
- Swimming Pool Maintenance
- Swimming Pool Service
- Swimming Pool Repair
- Outdoor Fireplace
- Outdoor Fire Pit
- Pool Safety
- Deep Blue Pools and Spas
- Exercise
- Swimming
- Outdoor Kitchen
- Pool Chemicals
- Chlorine Levels
- Water Feature
- Burning Calories
- Pool Contractor