After your hot tub installation in Salt Lake City , adding chemicals to it regularly will help to ensure that you can continue to enjoy it for many years to come. To learn the right way to add chemicals to your hot tub, watch this video.

To add chemicals, make sure your jets are turned on. Measure the chemicals you are adding and sprinkle them across the surface of the water. The jets will help spread the chemicals through the water. Leave the jets running with the hot tub cover off for about 15 minutes to make sure that the chemicals are appropriately distributed throughout the water.

There’s nothing quite like a relaxing dip in a hot tub on a chilly evening. If you’re anticipating an upcoming hot tub installation at your home near Salt Lake City, there are a few things you should know. First, read the owner’s manual thoroughly, and ask the hot tub installation expert if the company also offers maintenance services. Since there’s a sharp learning curve to owning and caring for a hot tub, having the experts perform maintenance tasks may be preferable for you.

Safety and Energy Efficiency

For safety’s sake, don’t exceed the maximum temperature listed in the owner’s manual. If you have kids, your hot tub shouldn’t exceed 100 ºF. Invest in a high-quality, insulated hot tub cover for both safety reasons and energy efficiency. Your hot tub should be covered and locked whenever you aren’t using it. Even if you don’t have kids, restricting access with a lockable cover can protect curious kids and pets from throughout the neighborhood.

Chemistry

Hot tub chemistry isn’t identical to swimming pool chemistry. You could use chlorine for a hot tub, but you probably won’t want to. When it’s mixed with very hot water, chlorine treatments give off a strong, unpleasant odor. Many hot tub owners prefer to use bromine or alternatives like biguanide sanitizer or mineral systems. Refer to your owner’s manual or hot tub installer for in-depth advice on pH levels, calcium hardness, clarifiers, and cleaners. Remember to drain and replace the water in your hot tub about every three to four months.

Filtration

Every new hot tub owner should know where the filter is. Remove it and clean it once weekly, and replace it entirely at least every year. Staying on top of your filter maintenance will help prevent costly damage to the hot tub.

Enjoyment

Hot tub maintenance shouldn’t take up too much of your time, but you might prefer to have a professional handle it for you, regardless. After all, you’ll want to give yourself plenty of time to get the most enjoyment out of your new water feature. Try a nice long soak before bedtime to help you fall asleep faster, and go for a dip whenever your muscles feel tense. In addition, once your spa is installed, you might notice that family and friends start to hint that they’d like an invitation, so consider keeping spare towels, swimsuits, and robes on hand for last-minute guests.

A hot tub is a small pool that you can usually keep open for a longer stretch of the year than your full swimming pool. Hot tub installation near Salt Lake City isn’t the end of the journey, though, and you will need to maintain the hot tub to prevent it from sustaining damage. Help your hot tub last for as long as possible by providing it with the right maintenance. You should pay particular attention to the temperature of the water, as it will be flowing through the pipes attached to your hot tub in both directions. Continue reading and find out why temperature maintenance really matters for your hot tub.

You probably won’t ever have to worry about the pipes going in and out of your hot tub freezing during the summer months, but it’s not out of the question when the winter comes around again. Maintaining a consistent temperature in your hot tub keeps the water from freezing and obstructing your pipes. This helps prevent clogs and pipe leaks, which could otherwise turn into real plumbing disasters. It’s also nice to take a dip in the hot tub in January, especially if you know the water will be warm.

After you perform a new hot tub installation on your property, you will be in charge of routinely maintaining your spa. In this video, you will learn some essential tips and tricks that will help you to maintain your hot tub installation over time. A company that offers swimming pool services in Salt Lake City can provide you with the chemicals that are needed to balance the water in your hot tub and eliminate harmful bacteria.

If you have been dreaming of a new hot tub installation for your property, now is a great time to schedule your project. With services from a company that sells hot tubs in your local area, you can set up a cozy spa that is ready to help you relax.

A new hot tub will provide you and your family members with the perfect place to relax and unwind at the end of a long day. If you are preparing for a hot tub installation near Salt Lake City, make sure to hire a qualified pool contractor to assist you with your project. From choosing the site for your hot tub to connecting the electrical wiring, your contractor will provide you with many essential services. Here is a step-by-step guide to what you can expect from the hot tub installation process.

Find the Best Site

The first step of a hot tub installation is to find a site that is appropriate for your new unit. Depending on the building codes in your city, you may need to place your hot tub at a certain distance away from the exterior of your home. Along with considering building code, you will also need to find an area that will allow you to conveniently access your hot tub.

Schedule the Delivery

After you have chosen the appropriate site for your hot tub and picked out a hot tub model that includes all of your favorite features, you will be ready to schedule a delivery with your contractor. In order to safely deliver your hot tub, your contractor will need to be able to safely reach the installation area. You may need to temporarily trim back trees or remove fence panels in order to successfully accomplish the delivery.

Connect the Electrical Wiring

During the final phase of your installation, your contractor will need to connect your hot tub to your home’s electrical grid. Your hot tub will require electricity to power its jets, lights, and other features. Since wiring a hot tub requires specialized knowledge and tools, you will typically want to leave this step up to your licensed hot tub installation contractor. Once the wiring is in place, you will be ready to start enjoying your new spa.

A hot tub in your backyard will provide you with a wonderful space to wind down and relax after a long day. When you schedule a hot tub installation for your home in Salt Lake City, it is important to remember that hot tubs and small pools require the same level of maintenance as large, inground pools. The pool contractor who performed your hot tub installation will be able to help you maintain your unit throughout the years and seasons. Let’s look at three maintenance factors that every hot tub owner needs to keep in mind.

Sanitizing

One of the most important factors that you will need to consider when you are maintaining your hot tub is how you will sanitize your water. In order for your hot tub to remain fresh and sanitary, it will need to be cleaned on a regular basis. If you do not have time to deeply sanitize your hot tub every month, you can hire a hot tub contractor to perform this service on your behalf.

Chemical Balancing

Achieving the right balance of chemicals in your hot tub water will ensure that you have an enjoyable experience every time you take a dip. If you currently own a swimming pool, you will be familiar with the process of testing and adjusting your water. A hot tub maintenance company can provide you with testing kits that will allow you to easily achieve the right balance of chemicals in your hot tub.

Temperature Control

The water in a hot tub is designed to remain at a consistently high temperature. If you allow your hot tub to cool down between uses, you may find that your unit starts to experience maintenance issues. In the wintertime, unheated water can even freeze over and crack. To keep your water at the correct temperature for your hot tub, you can use the dials or controls that are located on its side.

A new swimming pool installation will provide you and your loved ones with plenty of fantastic outdoor recreational opportunities during the upcoming summer season. If you are getting ready for a new swimming pool installation for your property, you will want to hire a highly rated swimming pool company near Salt Lake City. From installing your pool to performing routine swimming pool maintenance, your contractors can assist you with every aspect of pool ownership. To help you get started on your pool or hot tub installation project, here is a quick look at a pool design and construction checklist.

Gather Inspiration

During the initial phases of the pool planning process, you will need to gather plenty of design inspiration for your brand new swimming pool. Rather than designing your pool from scratch, you can look at landscaping websites, home design magazines, and other sources for ideas and inspiration. You may even want to consider creating a notebook to gather all of the pool features and materials that you want to include in your new pool.

Write Down Your Must-Haves

As you are designing a new pool construction, you will want to make sure that you clearly communicate your desires to your pool contractors. Before the pool building process begins, you can write down a list of the must-have features that you want to include in your new pool. Some popular features include waterfalls, fountains, LED lights and tanning shelves. These features will transform an ordinary pool into a gorgeous backyard oasis.

Consider Your Layout

No pool design and construction checklist would be complete without a thoroughly considered layout and blueprint design. The layout of your swimming pool will depend greatly on the size and shape of your backyard. To determine the ideal shape and orientation of your pool, you can use a rope or gardening hose to physically mark off your desired pool area. Once you have seen the layout of your pool in person, you will have a better idea of what it will look like when it is completed.

As the days get longer and outdoor temperatures to start to warm up, you and your family members may be getting ready to open your backyard pool for the season. An essential step of proper pool maintenance is to close up your pool during the cold months of winter. Once spring arrives, you can switch on your pool heater, pull off your pool cover, and start enjoying your pool once again. A contractor that offers pool maintenance near Salt Lake City can help you get your pool ready for the peak summer swimming season. Let’s take a look at some factors that can help you decide when it is time to open up your pool.

Consider Changes in Temperature

Keeping your pool closed up after outdoor temperatures have increased significantly could lead to a maintenance problem with your pool water. Warm air can raise the temperature of your pool water, which will create the perfect breeding ground for algae. To avoid opening up your pool to find a mess of green slime, you will want to open your pool as soon as it starts to get warm outside.

Review the Local Weather Forecasts

During April and early May, you may be deciding between opening up your pool on a sunny day while weather averages are still low or waiting until the weather is consistently warm and sunny. To decide when you should open your pool for the season, you may want to review the weather forecasts for your local area. If sunshine and warm weather are in your weather report for the coming week, it may be the perfect opportunity to open up your pool.

Look at Your Social Calendar

Before your first big get-together during the spring or summer season, you may want to get your pool open and ready for your guests. By opening up your pool for an event with your family and friends, you can treat your loved ones to a day of poolside fun. If you have an upcoming party planned at your house, now is the time to start thinking about opening your pool.

Hosting a pool party is a great way to celebrate your new pool installation near Salt Lake City . When you watch this video, you will receive some essential tips and tricks for planning a pool party that your family and friends will remember. Some important supplies to gather for your pool party include tasty finger foods, refreshing drinks, and a signature cocktail. For safety purposes, you should always use unbreakable dishes and cups around your fresh water or salt water pool.

If you have been dreaming of hosting a memorable pool party in your backyard, a pool contractor can help make your dreams into a reality. After your professional pool and hot tub installation, you will be ready to invite guests over to take a dip in your private swimming pool.

When you take a dip in your pool this spring, the last thing that you will want to see is cloudy water filling up your pool. Luckily, with a few routine pool maintenance procedures, you will be able to keep your pool water clean and clear at all times. A pool contractor that offers swimming pool maintenance near Salt Lake City will be there to answer any questions that you may have about how to keep your pool water clear. To help you determine what types of cleaning supplies you will need to purchase from your swimming pool company, let’s review some common causes of cloudy pool water.

Environmental Factors

Your outdoor swimming pool is surrounded by items and materials that can cause cloudiness in the water. Some examples of substances that can cloud up your pool water include tree pollen, construction debris, and even unusual weather patterns. If you determine that your pool water cloudiness is being caused by environmental factors, you may need to purchase a swimming pool cover to protect your water from contamination.

Broken Pool Filter

Your pool filter’s job is to remove algae, leaves, and other types of debris from the water in your pool. In the event that your pool filter breaks down, you may find that your pool water starts to look foggy or clouded. A pool maintenance technician will have the tools and knowledge needed to fix your broken pool filter and remove any clogs that might be jamming up its internal systems.

Excessive Pool Chemicals

While pool chemicals are necessary to keep your water clean, clear, and sanitary, using too many chemicals in your pool could result in cloudy water. If your water is too acidic, too alkaline, or filled with too much calcium, it might start to have a milky or cloudy appearance. To avoid problems related to swimming pool chemistry, you can use a pool chemical testing kit to achieve the right balance. If using a testing kit does not help you clear up your cloudiness issue, you might be in need of professional maintenance services.