A hot tub is a small pool that you can usually keep open for a longer stretch of the year than your full swimming pool. Hot tub installation near Salt Lake City isn’t the end of the journey, though, and you will need to maintain the hot tub to prevent it from sustaining damage. Help your hot tub last for as long as possible by providing it with the right maintenance. You should pay particular attention to the temperature of the water, as it will be flowing through the pipes attached to your hot tub in both directions. Continue reading and find out why temperature maintenance really matters for your hot tub.

You probably won’t ever have to worry about the pipes going in and out of your hot tub freezing during the summer months, but it’s not out of the question when the winter comes around again. Maintaining a consistent temperature in your hot tub keeps the water from freezing and obstructing your pipes. This helps prevent clogs and pipe leaks, which could otherwise turn into real plumbing disasters. It’s also nice to take a dip in the hot tub in January, especially if you know the water will be warm.

Your hot tub cover near Salt Lake City can start to get grimy if you don’t take care of it, and you might even notice odors coming from the pool area. Hot tubs contain water at ideal temperatures for bacterial growth, which can make for a dangerous situation. Watch this video on fighting back against odors on your spa cover.

The smell from your hot tub could be due to mold or mildew, which might occur if you don’t balance your water chemistry. Balancing your pH, alkalinity, and sanitizer levels can keep your cover smelling fresh. You also need to remove and clean your hot tub cover every occasionally, and remember to rinse it off and let it dry before you put it back on your pool. If your spa cover is looking like it’s already outlasted its lifespan, talk to your pool professionals and get a new one.

A new swimming pool installation serving Salt Lake City may change the way you enjoy your summers. What you might not have thought about is how you can get it ready for the winter. You can start by taking out floats, toys, and any minor water features that might be floating around, and then you can focus on the smaller debris and contaminants that have found their way into the pool. Don’t choose a pool cover just because it’s on sale, because a low-quality cover might not do a great job of protecting your investment throughout the offseason. Read ahead and find out if your pool is ready for winter.

Take Everything Out

By the end of the summer, you might have accumulated a hefty inventory of pool toys. Before you can shut your pool down for the winter, you need to get everything out of the water. This means all pool noodles, floats, volleyball nets, and floating filters need to come out. Take out removable ladders as well, and give the pool a good sweep for any stray diving toys that might have been left behind. You should not have anything but water in your pool when you fully close it for the season.

Clean the Water

Since you shouldn’t have anything in your water by the time you put the lid on the pool, all the bugs, leaves, and debris should be gone too. Skim and vacuum your pool until the water looks clearer, and then focus your attention the chemical balance. The pH level, alkalinity, and calcium hardness all need to be in balance for your pool to make it through the winter. Clean the walls and floor of your pool, and empty out filters and pumps that may still contain water and debris.

Cover It Up

Once you have properly tended to your pool, the final step in winterization is closing it. Find a sturdy, dependable pool cover that’s strong enough to support the weight of a child or animal in case any accidents happen. In this case, the right cover can save lives.

After the pool contractor in Salt Lake City finishes the job and heads home, it’s your responsibility to maintain your water. Cloudy water takes away from the aesthetic appeal of your outdoor or indoor swimming pool, and it usually shows up because of unbalanced levels or neglected maintenance. Aside from checking your levels and maintaining your pool, you can look into a pool clarifier to brighten up your water. Here’s a look at what causes cloudy pool water and what you can do to get rid of it.

Unbalanced Levels
 
Anyone who has maintained a pool for at least summer has seen the effects that different balances in chemicals can have on the water. When maintaining your pool, check levels like the pH of the water, alkalinity, and water hardness. There are different levels of cloudiness, and the more chemically imbalanced your water is, the more clouding is likely to occur. This type of problem could be specifically due to low chlorine levels. If you feel like you’ve been keeping your water balanced but you still notice that it’s cloudy, talk to your pool contractor to see if you need new chemicals.

Lack of Maintenance

Your filter is responsible for taking in water and removing the contaminants, and then returning the cleaned water back into the pool. If you don’t practice proper pool maintenance and take care of your filter, you might end up with cloudy water. Skim the water yourself to remove insects, leaves, and animal droppings. These factors can cloud up your water, but getting rid of the contaminants quickly can make pool maintenance easier. Don’t forget to maintain your filter, as that is one of your only other lines of defense.

Pool Clarifiers

If you’ve been doing everything right but you still have cloudy water, try a clarifier. A pool clarifier forces small particles and contaminants to stick together, which makes it easier for the filter to get rid of them. Use a clarifier to clump these particles together so you can enjoy clearer and cleaner pool water.